High temperature shielded type, the output power per meter is 50W at 10°C, and the working voltage is 220V.

Silicone sheet electric heating belt is a thin strip heating product (standard thickness is 1.5mm). It has good flexibility and can be wrapped around a pipe or other heating body with heat-resistant tape to fix it like a rope, or it can be directly wrapped in a heated The outside of the body is fixed with a spring hook, and the heating performance is better if an insulation layer is added. The heating element is made of nickel-chromium wire wrapped with heat-conducting and insulating silicone material, which is molded at high temperature, so the safety performance is very reliable. Pay attention to avoid overlapping winding installation as much as possible, so as not to affect heat transfer and affect the service life of the product.

Cover material: (316L) stainless steel, (CU) copper, (AL) 825 alloy, (CN) copper-nickel alloy

HGC series connecting constant power heating cables use core conductor as heating element.

TXLP/1 220V single-guide heating cable is mainly used in floor heating, soil heating, snow melting, etc.

Without laying a cement layer, it can be directly buried under the adhesive of 8-10mm of ground decoration materials. It is flexible in laying, easy to install, easy to standardize and operate, and suitable for various ground decoration materials.Whether it is a concrete floor, a wooden floor, an old ceramic tile floor or a terrazzo floor, it is installed in a ceramic tile adhesive and has little effect on the elevation of the ground.

There is no need to lay a cement layer, and it can be directly buried under the 8-10mm adhesive of the ground decoration material. Flexible laying, easy installation, easy standardization and operation, suitable for various floor decoration materials. Whether it is a concrete floor, wooden floor, old tile floor or terrazzo floor, it can be installed on the tile glue with little effect on the ground level.

Introduction to graphene heating film (product picture) Product description: Graphene heating film uses two-dimensional atomic crystal-graphene to generate heat. Graphene is a dense layer of carbon atoms wrapped in a honeycomb crystal lattice with a thickness of only 0.34nm. Graphene has many excellent properties, such as high mechanical strength (Young's modulus up to 1TPa), good electrical conductivity (resistivity only 10-6Ω.cm), thermal conductivity (thermal conductivity up to 5300W/m.K), high saturation current density (can withstand 100-200 million A/cm2 of current) and large specific surface area (theoretically up to 2630m2/g). The heating film made of graphene has the advantages of fast heating, fast heat dissipation, and good stability.
Graphene low-temperature heating film (special for floor heating building materials) is as warm as sunshine. The two-dimensional warm ene low-temperature heating film is a film that can generate heat after power is turned on. It is made of super conductive graphene heating film and metal current-carrying strips that are processed and encapsulated between waterproof insulating PET films. When working, the graphene heating film is used as the heating element to send heat into the space in the form of radiation. Its comprehensive effect is better than the traditional convection heating method. Unique graphene heat energy far infrared. The far infrared radiation rate of the two-dimensional warm graphene heating material is as high as 87%. According to the detection of infrared application experts from national authoritative departments, its wavelength is 6~16um. It is a kind of infrared ray that is beneficial to human health and is called "light of life" by scientists. It can be quickly absorbed by the human body, dilate capillaries, promote blood circulation and metabolism, activate tissue cells, and enhance human immunity.

Introduction to graphene heating film (product picture) Product description: Graphene heating film uses two-dimensional atomic crystal-graphene to generate heat. Graphene is a dense layer of carbon atoms wrapped in a honeycomb crystal lattice with a thickness of only 0.34nm. Graphene has many excellent properties, such as high mechanical strength (Young's modulus up to 1TPa), good electrical conductivity (resistivity only 10-6Ω.cm), thermal conductivity (thermal conductivity up to 5300W/m.K), high saturation current density (can withstand 100-200 million A/cm2 of current) and large specific surface area (theoretically up to 2630m2/g). The heating film made of graphene has the advantages of fast heating, fast heat dissipation, and good stability.
Graphene low-temperature heating film (special for floor heating building materials) is as warm as sunshine. The two-dimensional warm ene low-temperature heating film is a film that can generate heat after power is turned on. It is made of super conductive graphene heating film and metal current-carrying strips that are processed and encapsulated between waterproof insulating PET films. When working, the graphene heating film is used as the heating element to send heat into the space in the form of radiation. Its comprehensive effect is better than the traditional convection heating method. Unique graphene heat energy far infrared. The far infrared radiation rate of the two-dimensional warm graphene heating material is as high as 87%. According to the detection of infrared application experts from national authoritative departments, its wavelength is 6~16um. It is a kind of infrared ray that is beneficial to human health and is called "light of life" by scientists. It can be quickly absorbed by the human body, dilate capillaries, promote blood circulation and metabolism, activate tissue cells, and enhance human immunity.

Residential buildings,villas,apartments,elderly apartmentsnursing homes,hotels,restaurantsschools,office buildings,office buildings,hospitals,kindergartens, welfare homes,stadiums,exhibition halls,theaters,indoor swimming pools,shopping malls,factories, seedling farms and other places.

I. Product overview
The temperature controller for the heating room can cycle once a
week, and can set six periods of time and the corresponding temperature
every day. The operation mode of it can also be selected as manual control
or temporary control. It is suitable for electric heating equipment control
used in electric heating and electric valve control used in water system
heating.    

II. Technical parameters
Display mode: liquid crystal display
Ambient temperature display accuracy: ± 1 ℃
Temperature control range: 5 ~ 95 ℃ (upper limit 35 ~ 95 ℃, adjustable)
Temperature limit range: 5 ~ 60 ℃ (factory 35 ℃)
Power supply voltage: 220VAC ± 10% 50 / 60Hz                                             
Load current: ＜ 16A
Shell material: PC + ABS flame retardant material
Protection grade: IP20