The Qingqichen silicone heating cable is a parallel type constant power heating cable, which is characterized by independent heating of each circuit contact. The lowest tolerance is -70°, and the highest surface temperature resistance can reach +200°C. With great flexibility, this type of heating cable is particularly suitable for industrial refrigeration due to its extreme low temperature and can be installed in the cold storage door. In order to ensure that these electric heating elements have a long service life, we recommend the use of a control device.

The silicone heating element is made by pressing two pieces of semi-cured silicone cloth together using high-temperature equipment. The silicone skin is very thin, which gives it excellent thermal conductivity. It is flexible and can adhere perfectly to curved surfaces, cylinders, and other objects that require heating.

Due to the relationship between the temperature and the resistance value of PT100 thermal resistance, people use this characteristic to invent and produce PT100 thermal resistance temperature sensor. It is an intelligent sensor integrating temperature and humidity collection. The temperature collection range can be from -200°C to +850°C, and the humidity collection range is from 0% to 100%.

Silicone sheet electric heating belt is a thin strip heating product (standard thickness is 1.5mm). It has good flexibility and can be wrapped around a pipe or other heating body with heat-resistant tape to fix it like a rope, or it can be directly wrapped in a heated The outside of the body is fixed with a spring hook, and the heating performance is better if an insulation layer is added. The heating element is made of nickel-chromium wire wrapped with heat-conducting and insulating silicone material, which is molded at high temperature, so the safety performance is very reliable. Pay attention to avoid overlapping winding installation as much as possible, so as not to affect heat transfer and affect the service life of the product.

Product introduction: silicone sheet electric tropical, for thin sheet heating products (standard thickness is 1.5mm), it has a good flexibility, can be wrapped like a rope around the pipe and other heating body outside with temperature tape fixed, can also be directly wrapped in the heating body outside with a spring hook fixed, such as adding insulation layer, heating performance is better. Its heating element is made of nickel-chromium wire two buns with thermal insulating silicone material, formed by high temperature molding, so the safety performance is very reliable, pay attention to avoid overlapping winding installation, so as not to affect the heat transfer, thus affecting the service life of the product.